• Description
  • Technical Data
  • Documentation
  • Programs
  • Available accessories

The QUANCOM® USBREL64 Board has 64 relays and is designed for industrial purposes.

Configuration Posibilities:
3A/90W: 32 SIL-Reed Relais with 3A/90W + 32 SIL-Reed Relais with 1A/15W
1A/15W: 64 SIL-Reed Relais with 1A/15W

Timeout control
The board has a configurable onboard timeout control which detects all writes to the USBREL64 USB Module. If the software hangs and the board isn't controlled by the personal computer the outputs are switched off. Think about a heating which overheats or even burns because the PC is "to busy" to switch the heating off. You may setup the timeout-time from 1ms to 16 hours in different steps. This feature can be switched off by a software command.

Additional Features

As all USB Optocoupler Relaymodules each channel has its own optical indicator through a LED. Through 4 additional Status-LEDs the state of the module is allways readable.

By mounting the module on to a top-hat rail the installation is very simple. You may order the needed rail in our shop, too.
An external 12V to 30V power supply is needed to operate this module. Also these power supplies may be ordered at our house. You may choose between our 12V/3A or 24V/2A.

By using the dip switch located on the mainboard the address of the module is configureable from 0 to 7. This address is used to identify the module in our QLIB if more than one module of the same type is used. You also have the possibility to configure this address by using our software tool which is downloadable on our website. Please note that the firmware installed on the module has to be above version 1.30 in order let the softwrae configure the address.

Software library
USBOPTOREL32 VB example
VB USBOPTOREL32 example
ZoomThe USBREL64 example shows the programming with Visual Basic
You need no knowledge in driver development. We implemented an command set which you can use for all operating systems. An application that controls the USBREL64, and which is generated for Windows 98 can be used directly on a Windows XP PC.

With the QLIB it is easy to create applications with Visual-Studio .NET, Visual-Basic, Borland Delphi or other modern compilers. Even an interface to MS Excel, MS Access or Sun Java is available. We included the VB USBREL64 example which demonstrates how to program and test the card. It also includes the source code and it is a good starting point for your own applications.

The USBREL64 is also available as USBOPTO64OUT and USBOPTO64IN .



•General I/O
-

•Inputs
-

•Outputs
relay type: 64 switch-on relays (DIL reed) (max. 3 A / 90 W or 1 A / 15W)
relay switching time: 1 ms
working voltages: GND / +5 V / + 12 V / - 12 V over 37pin D-SUB socket

•Bus
USB

•Temperature Range
0...50 °C



Manual for the USB Flasher
PDF manual for the Firmware Update Programm
[Download 281.7KB]


Manual for USB, ETH and SER Optocoupler and Relay Modules
This is the manual for our optocoupler and relay modules.
[Download 1898.8KB]



QCLI (QUANCOM Command Line Interface)
The QUANCOM Command Line Interface (QCLI) was made for all those which don´t have programming experience or knowledge.

It is a simple command line tool which makes it able to control our I/O and Watchdog boards with some very simple strings.

Note that this procedure is not as fast as a programm written in a higher programmiung language, for example C.
[Download 56KB]


Command Line Tool to Change Module Address
This command line tool makes it possible to change the address of your module by software.

Note that therefore the installed Firmware has to be higher or equal to Version 1.30 and the switch in the QLIB Configuration Utility must be set correctly.
[Download 35.4KB]


QCLI (QUANCOM Command Line Interface)
Das Quancom Command Line Interface (QCLI) ist für diejenigen gedacht, die sich in der Programmierwelt nicht zurechtfinden, oder auch keine Lust haben sich ein eigenes Programm für den Zugriff auf unsere QUANCOM Karten zu schreiben. Da das QCLI recht simpel gehalten ist, ist es um ein wesentliches langsamer, verglichen zu einem gut programmierten Programm. Mit einfachen Funktionen der QAPI lassen sich über das QCLI QUANCOM Karten und Module bedienen und konfigurieren. [Download 32.1KB]


Firmware Version 1.56
Current firmware for QUANCOM USB-, ETH- & SER modules

 USB Flasher Guide

Caution: This firmware is not to be used with the following modules
  • USBGPIB1
  • USBCOUNTER1
  • USBCPU1
  • USBREL8UM
  • USBREL8 & /LC
  • USBOPTO8 & /LC
[Download 27.6KB]


Firmware Version 1.34
Firmware for QUANCOM USB-, ETH- & SER modules

 USB Flasher Guide

Caution: This firmware is not to be used with the following modules
  • USBGPIB1
  • USBCOUNTER1
  • USBCPU1
  • USBREL8UM
  • USBREL8 & /LC
  • USBOPTO8 & /LC
[Download 20.7KB]


QCLI QUANCOM Command Line Interface
( Windows Executable )

QUANCOM QCLI provides the user with a simple to use command line tool to control QUANCOM hardware.

[ Further Information to QCLI ]

[ Online-Documentation to QCLI ]

[Download 56KB]



Hutschiene
Top-Hat Rail


MODSSR230*1
230Volt solid state relay for DIN rail assembly


NT12V/3A
Compact power supply


NT12V/3A
Compact power supply


NT24V/2A
Compact power supply


  Add to cart
Price
636.84 Euro
(incl. Taxes)

Operating Systems
Windows 10/8/7 (32/64)
Windows Vista (32/64)
Windows XP (32/64)
Windows 2000
Win Server 2008/2012 (32/64)
Win 2003 Server (32/64)
Win 2000 Server
Windows 95/98/Me
Linux
Similar Products
 
ETHREL64

Ethernet Interface
64 relay (1A)
Tough Metal Case
 
SERREL64

RS232 Interface
64 relay (3A)
Tough Metal Case
 
USBOPTO16IO

16 Optocoupler Inputs
16 Optocoupler Outputs
Tough Metal Case





... back to home




Updated on 13.6.2015 by Michael Reimer